MCUNWC01N56W48K
NWC01N56W48K supports WPC 2.X standard and is a one-chip wireless charging TX controller MCU with 32Bit RISC CPU, Embedded Program Memory, and various dedicated IPs
| CPU & Memory | - 32 bit CPU core
- 48KB EEPROM
- 6KB SRAM
- 2KB Buffer RAM for ADC
|
|---|
| Clock | - 16 / 96MHz internal RC
- External X-tal clock |
|---|
| Power | - Input VCC range : 3.9V ~ 20V
- 3.3V LDO for peripherals & IO
- 1.5V LDO for CPU
- AVDD pin for ADC power.
- LVD (2.6~2.9V range) Typ:2.8V
|
|---|
| 12bit ADC | - One 12bit ADC with 10channel input
- 9 channel input from GPIO pins
- 1 channel input through special OPAMP
|
|---|
| OPAMP | - 2 channel special OPAMP for communication
- 3 channel rail to rail non inverting
|
|---|
| PWM | - Total 3 pair Full bridge
- High side level shift(Max. 20V)
- Low side level shift(Max. VCC)
- Support 4 kinds of mode.
- External crystal clock source(Xin, Xout)
|
|---|
| I2C & UART | - 1 channel UART Tx debug
- 1 channel IIC with (master/slave function)
|
|---|
| Timer | - 4 channel 16-bit Timer for GP
- Watchdog timer
- 16-bit Sub RC Timer
|
|---|
| GPIO | - Configurable 16pin GPIO
- Configurable Pull-up/down resistor
- Configurable Timer output for BUZ and LED
|
|---|
| Peak to Peak Logic | - Automatic detection of peak to peak value while defined PWM period
- 2KB buffer RAM with DMA |
|---|
